How to Replace a Saab 9-3 Key
The Saab 9-3 is a great car that provides a lot of appeal for drivers. It has excellent visibility and an impressive performance engine. It also has a top safety rating.
However, it is important to make sure that you have at minimum two keys that work for your car. It can be expensive to replace a key if you lose it.
How to replace the ignition Key in the Saab9-3
If your car key won't turn in the ignition and you want to replace it, you'll need to replace it. This guide will walk you through the steps to do it on the Saab 9-3. You'll need a new key with a reprogrammable battery and a new key-fob case.
saab 9-3 key programming thekeylab.co.uk utilize transponders instead of a key made of metal to unlock the vehicle and allow it to start. The reprogrammable batteries in the key-fob inevitably expire, and they aren't able to hold any charge. This is particularly applicable if you are using the same key for the same lock.
A professional locksmith can replace the battery quickly. If you've got the right tools and patience, you can do it yourself. The first step is to separate the key-fob. Insert a flathead into the slot in the middle of your case. The plastic is thin, and can easily be damaged.
After the case has been opened and the case is opened, you can make the new key by combining the lower portion of the key that was used previously with the transponder and banana on the new key. This will ensure that the new key is linked to the CIM properly, which could make all the difference when replacing the only key for your Saab 9-3.
How do I replace the ignition Key on the Saab 900
Unless you have two keys, you will have to take off the dashboard and steering wheel in order to access the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, you can take off the dashboard and trim pieces that surround the steering wheel. Once the dash is removed, you can insert a screwdriver in the opening behind the ignition switch.
The ignition barrel has a key lock that could stop the car from starting if a key isn't there. If your 900's ignition isn't working, check the key to determine if it's in the lock or stuck in the barrel of the ignition. It is also recommended to rotate your keys and keep them clean to prevent bent.
Saab cars differ from other cars in that they don't use traditional keys made of metal. Instead, the car recognizes electrical signals that come from the key fob by using an specialized microchip inside.
If you lose just one functioning key fob, your dealer will charge an extra fee to replace your computer module (also called the CIM). We can reprogram the EEPROM on your existing computer and enable it to accept new keys without the need for replacement. This will save you over 50% of the price the dealer charges! This is the SAAB Key PROGRAM. Find out more about it here!
How to replace the ignition Key in a Saab9-5
The metal part of classic Saab keys is easy to copy and doesn't pose a significant threat to theft of vehicles. The real security comes from the electronic part in the key-fob, which is equipped with a chip which recognizes your car once it's inserted into your ignition switch.
Saab has relied on the technology of this anti-theft system for over 10 years. It's not as effective as an actual lock on the door however it makes the act of stealing your car harder. Every Saab owner needs to keep a spare Saab key in their car.
The majority of new Saabs come with two keys in the factory, however you can upgrade them at an authorized dealer using a handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which are equipped with more modern and advanced features that require a different key-fob and work through a different process.
If you lose all keys and the dealer replaces your CIM or TWICE modules, and charge you the cost of replacement. However, we can reprogram your EEPROM in your existing computer and set it up to accept new keys, and not replace the expensive modules.
How to Replace the Ignition Key on the Saab XC90
If your SAAB 9-3 key fob is having trouble turning the lock barrel It could be the time to replace it. The process is simple and you don't have to visit a dealership. Instead you can complete the process yourself at home by using some basic tools.
The first step is to prepare the new key. Before you start, be sure that the anti-theft system has been disabled by placing blocks on the rear wheels, and then adjusting the handbrake. After that, put the key in the ignition and switch it to the on position, which activates the accessories, but it does not start the engine. Repeat this five times, and then put the key on the "on" position.
You'll then have to buy an additional case for your key fob. They can be found at any auto parts store, and they're typically very affordable. They can be purchased without electronics depending on the model.
To open the case you need to gently push the screwdriver with a flathead into the slot in the middle. After you've separated the case, you will be able to access all the internal electronics. To remove the electronics, employ a small screwdriver and try to pry them out in a gentle manner.